Programming An External Line; Groups Of External Lines; Overflow For A Group Of External Lines - Siemens HiPath 1100 Programming Manual

Step by Step
0 or 8 9 0
or
0 8 9 0

Programming an External Line

Groups of external lines

Programming allows access to an external line or group
of external lines through a code other than "0."
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 5 6
a 8 9 9 Enter the group code number (default is 0).
Enter a number for an external line (e.g., 801).
# Press this key.
Initial state for Programming Mode.

Overflow for a Group of External Lines

This feature makes a second group of external lines
available in the event the lines in the first group are
busy. The availability of the second group of external
lines depends on the extension's class of service.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 9 9
a Enter the number for the group of external lines (e.g.
8 9 9
Select an option:
= A specified group of external lines (the first
1
= All external line groups
2
= None
3
Press this key.
#
Initial state for Programming Mode.
group is the default setting):
Enter a number to specify the Overflow Group
to be used:
0 or 8 9 0 to
Programming an External Line
8 9 9
41