Hipath 1100 Adsl Manager - Siemens HiPath 1100 Programming Manual

HiPath 1100 ADSL Manager

Step by Step
174
If the database has been previously saved in an
earlier version (HiPath 1100 V5.1 or V5.2) and you
want to update the database to HiPath 1100
V6.0, all you need to do is restore the *.bup file
and the system will execute an automatic up-
date. At the end of this process a pop-up mes-
sage appears informing the user of the changes
that were made.
Refer to the HiPath 1100 Manager Help file before exe-
cuting this procedure.
HiPath 1100 ADSL Manager
HiPath 1100 ADSL Manager is an administration soft-
ware designed for programming ADSL modules.
Hardware Requirements:
. 10/100 Base-T network card
General Information:
– TCP/IP protocol
– Default IP: 10.0.0.1
– Default subnet mask: 255.255.255.0
If you need to reset the IP address and the sub-
net mask, use code 013 "Restore ADSL module
default settings."
When using an ADSL module, do not connect the
V.24 serial interface adapter cable to the PABX
Once ADSL access to the provider is established and
the module is connected to the HiPath 1100, you may
need to make some adjustments for WAN and LAN
use. The HiPath 1100 ADSL Manager application is de-
signed to help you make these adjustments. It allows
you to view, edit and update your system's configura-
tion.
For more details on how to configure an ADSL module,
see the topics in the Help file of the HiPath 1100 ADSL
Manager software.