Programming an Extension
Step by Step
0 0
54
Alert Ring Timeout for Pickup Groups
If a call is not answered within a specified period of
time, a short alert ring is sent to the Pickup Group (see
also "Pickup Groups").
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 3 5
...
5 9
Enter the length of time for the Alert Ring Signal (00 to
59 seconds).
or
Disable the Alert Ring Signal (default).
*
Initial state for Programming Mode.
Call Groups (CG)
Extensions can be grouped in Call Groups (CG) that can
then be accessed through numbers 770 to 779. When-
ever this number is dialed, all telephones in the group
ring simultaneously until one of them answers.
In the default configuration the first 10 extensions in Hi-
Path 1100 systems belong to Call Group 770.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 1 3
Enter the Call Group number (770 to 779).
...
Enter the extension numbers (up to 10 extensions -
e.g., 11/101) to be included in the Subscriber Group.
Press this key.
#
Initial state for Programming Mode.