Hipath 1100 Manager - Siemens HiPath 1100 Programming Manual

Step by Step

HiPath 1100 Manager

The HiPath 1100 Manager is an administration software
designed for programming HiPath 1100 systems quickly
and easily by means of a graphical interface without the
need to know programming codes.
Aspects to Consider:
The HiPath 1100 Version 6.0 application installa-
tion overwrites HiPath 1100 Version 5.2 installa-
tion. During installation no message is displayed
to warn the user that HiPath 1100 Version 5.2 is
being removed
Both versions are supported; a HiPath 1100 Ver-
sion 5.2 PABX can be managed using HiPath
1100 Version 6.0
HiPath 1100 Version 5.2 and HiPath 1100 Version
6.0 cannot both be installed in the same comput-
er. Otherwise, neither will work ;
The HiPath 1100 Manager can access the switch as fol-
lows:
• Locally:Connecting a USB interface, an optiPoint
500 U interface, a V.24 interface
P0/E
• Remotely: Through a LAN, provided there is a net-
work PC connected to the HiPath 1100 via a serial or
USB interface or an ADSL module
•
When using remote administration over an ISDN
digital line, where no traffic is detected between
the system and the remote programmer, the sys-
tem can be configured to terminate the connec-
tion after a specified period of time (1 to 60 min-
utes) or to maintain the connection indefinitely.
• Offline Programming Mode: allows you to view,
edit and store a HiPath 1100 database on a PC that
is not currently connected to the PABX and later
transfer it to it.
You can also update the HiPath 1100 software using the
HiPath 1100 Software Update then store the database
with the system's settings.
HiPath 1100 Manager
173