Programming An Extension; Pickup Groups - Siemens HiPath 1100 Programming Manual

Step by Step
...
0 1
...
0 1

Programming an Extension

Pickup Groups

Extensions can be grouped into a maximum of 16 Pick-
up Groups. This allows an extension to answer calls that
ring at other extensions belonging to the same Pickup
Group.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4 3
1 6 Enter the number of the Pickup Group (01 to 16).
...
Configure extensions for a Pickup Group (e.g., 11/101).
# Press this key.
Initial state for Programming Mode.
Deleting Extensions from a Pickup Group
Required: Programming Mode must be active (*95
31994).
1 4 3 Enter the code for programming.
Enter the number of the Pickup Group (01 to 16).
1 6
Delete the extensions in the call Pickup Group.
*
Press this key.
#
Initial state for Programming Mode.
You can also add extensions to an existing Pickup
Group.
Programming an Extension
53