Call Answering Menu - Siemens HiPath 1100 Programming Manual

Fax/DID
Step by Step
Fax/DID Mode
In this mode of operation the Interface detects fax sig-
nals, and extensions or digits entered. When an exter-
nal call is answered, a greeting announcement is played
to guide the caller. An example of a recorded announce-
ment would be: "You have reached Siemens. To send a
fax start transmission now. For Sales Department dial
22. For Technical Support dial 23." If no valid fax signal,
digit or extension is detected within 10 seconds of the
greeting announcement, a second announcement will
be played and the call will be transferred to an Atten-
dant.
Announcement Mode
When an external call is answered, a greeting an-
nouncement is played and the call is transferred to an
attendant. An example of a recorded announcement
would be: "You have reached Siemens. Your call is being
transferred."
Auto Fax Mode
When running on this mode modo, the system detects
fax signals during the first 10 seconds of the conversa-
tion. If a signal is detected, the call is transferred to an
extension configured for fax. If no fax signal is detected
the consversation continues as usual.

Call Answering Menu

The Produktname lets you create a customized call
answering menu transferring the call to an extension or
a group, depending on the number entered.
A call is transferred to a preconfigured destination after
3 seconds. If a digit is entered before this period of
time, it will be analyzed and the call will be forwarded to
a new destination. The destination can be an extension
or a group.
When the Call Answering Menu is not configured, the
system can only detect extension and group numbers.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 0 9
... or
Select a digit for Call Forwarding.
0 9
*
129