General Programming
Step by Step
98
Types of Caller Lists
This setting specifies if only external calls or all internal
and external calls should be displayed in the Caller Lists.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0
4 9
1
or
2
Select the type of Caller List:
1
2
Initial state for Programming Mode.
To insert an interdigit pause you must enter the
"P" character using the HP 1100 Manager or
pressing the Redial Key using a system
telephone.
Each "P" character inserts a 2-second pause
(default) in the connection. A longer pause can
be inserted by entering more than one character
(for example, for a 4-second pause enter "PP")
The first "P# or #" specifies that the next digits for
A will only be forwarded if:
- Digital line or S
P# - DTMF digits are sent after local carrier
identification, when B is not answered.
# - DTMF digits are sent after B is answered.
- External analog line or analog extension:
P# or # - DTMF digits are sent after B is
answered.
Other characters ("#" and/or "*") may be
added following "P#".
An inter-digit pause("P") cannot be inserted when
using an analog telephone for programming
Individual Speed Dialing.
= External
= Internal and external (default)
extension:
0