Step by Step
*
Internal Access Code for Automatic
Seizure
This features specifies the code to be used for making
internal calls when an extension is configured for
Automatic Seizure of an External Line.
Access codes are configured according to the country.
If no access code is specified, the feature will not work.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 2 6
Enter an access code consisting of a maximum of 5
digits.
Initial state for Programming Mode.
Default Access Code Table by Country
Country
Spain
Latvia
Lithuania
Australia
Greece
Italy
Portugal
Other
External Line Present
System slots that are not connected to an external line
should be configured as "unavailable."
Required: Programming Mode must be active (*95
31994).
0 7 9
Enter the code for programming.
Enter a number for an external analog or digital line
(e.g., 801).
or
#
Present/Absence of an external line
= Present (default)
*
= Absent
#
Programming an External Line
Code
99
69
6
None
51