Siemens HiPath 1100 Programming Manual page 178

VMIe Protocol
Step by Step
178
1. Internal call from Extension 16 to the VMIe Group:
***1***16*1;
2. Direct internal call from Extension 15 to Extension
11, forwarded to the VMIe Group (*11):
***3****15****11*1;
3. Direct internal call from Extension 1015 to Extension
1011, forwarded to the VMIe Group (*11):
***3**1015**1011*1;
4. Incoming call over an external analog line to Exten-
sion 11 which is forwarded (*11) to the VMIe Group:
***3**********11*3;
5. Incoming call over an digital line to Extension 11
which is forwarded (*11) to the VMIe Group:
***3**********11*4;
6. Incoming call over an external analog line to Exten-
sion 12 which is forwarded to the VMIe Group con-
figured as Second Attendant:
***4**********12*3;
7 . Incoming call over an digital line to Extension 12
which is forwarded to the VMIe Group configured as
Second Attendant: ***4**********12*4;
8. Internal call from Extension 1015 directly to Exten-
sion 1011 which is forwarded (*11) to the VMIe
Group: ***3**1015**1011*1;
9. Direct internal call from Extension 10015 to Exten-
sion 10011, forwarded to the VMIe Group configured
as second Attendant: ***4*10015*10011*1.
Voice Mail Protocol for the system:
The Voice Mail signals to indicate when there is a mes-
sage waiting at an extension's mailbox. For this purpose
it uses a DTMF service code (*68) followed by the ex-
tension number. When a message is erased, another
DTMF code is used (#68) in order to deactivate signal-
ing at the extension belonging to the VMIe Group.
These codes are configurable to provide compatibility
with different Voice Mail systems. Please check items "
Deactivating the Internal MWI #68" and "Activating the
Internal MWI Internal *68" in the HiPath 1100 System
Manager "System Settings - Service Code" folder.
For example,
1. The Voice Mail System indicates that Extension 13
has a message waiting in its mailbox: *6813;
2. The Voice Mail System indicates that the mailbox for
Extension 12 is empty: #6812.