Collect Call Barring For A Ucd Subscriber Group - Siemens HiPath 1100 Programming Manual

Step by Step
*
Collect Call Barring for a UCD Subscriber
Group
When this blocking is activated, the system automati-
cally rejects all incoming collect calls to a UCD Group
over a digital line. Calls received over an analog line are
rejected only at the moment they are answered. The
system bypasses Collect Call Barring for members and
non-members of the UCD Group. This means that Col-
lect Call Barring is only acknowledged.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 0 7
Enter the UCD Group number (e.g., 790).
or
Activate/Deactivate collect call barring.
#
= To activate
*
= To deactivate (default)
#
Enter the next UCD Group number.
or
Press this key.
#
Initial state for Programming Mode.
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.
Programming an Extension
57