Introduction; About This Programming Manual - Siemens HiPath 1100 Programming Manual

Introduction

Introduction
The HiPath 1100 family consists of the following systems: HiPath 1120, HiPath 1150 and
HiPath 1190. The features and operation of these systems are very similar. Their differenc-
es stem from their capability regarding the number of extensions, external lines and op-
tional modules available.
The following documentation package was developed to describe the characteristics for
these systems:
• User Manual:
This manual describes step by step how to operate and use the features provided by
each system.
• Programming Manual:
The Configuration Manual briefly describes the installation of HiPath 1120, HiPath 1150,
and HiPath 1190 systems as well as the programming codes for the entire family of sys-
tems. It highlights the specific characteristics of each system.
• System Telephones Instruction Manual:
It is included with the telephone package and describes how to setup and use the tele-
phone sets.
• Quick Reference Guide Analog and System Telephones:
This guide provides summarized information on how to use the different codes for the
features of each system.
• Attendant Console Quick Reference Guide:
This guide provides summarized information on how to use a system telephone as an
Attendant Console.
• Service Manual.
This manual contains information regarding Siemens distributors and Service Centers
where you can purchase products and obtain technical support for your Communica-
tions System.
• Warranty Certificate:
This Certificate defines the terms and conditions of the warranty provided by Siemens.

About This Programming Manual

This User Manual describes how to program the HiPath 1100 systems. It also describes all
the programming codes and functions provided by your system. Some functions may not
be available with your system. The reasons for this are the following:
• The function is not configured for your type of line and/or system. Ask your System Ad-
ministrator for further information.
• Your communications platform does not support the feature. Ask about upgrade capa-
bilities for your system.
2