Maximum Number Of Auto-Configurable Mailboxes; Mailboxes Assignments - Siemens HiPath 1100 Programming Manual

EVM Module
Step by Step
0 1
0 1
158
Maximum Number of Auto-Config-
urable Mailboxes
This setting determines the number of mailboxes that
can be configured by the user. No other settings need
to be configured for the auto-configurable mailboxes. If
the number of mailboxes allowed is exceeded, it will
not be possible to configure settings correctly when us-
ing the EVM.
If mailboxes have already been configured using the Hi-
Path 1100 Manager, fewer mailboxes will be available
for auto-configuration. For example, if there are 12 mail-
boxes and 10 have been configured through the HiPath
1100 Manager, only 2 mailboxes will be available for
configuration by the user.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 0 2
...
2 4 Enter the number of auto-configurable mailboxes (de-
fault setting is 12).
Initial state for Programming Mode.

Mailboxes Assignments

Assigns mailboxes to user's extension slots or EVM vir-
tual ports (when using MSN Attendants).
Required: Programming Mode must be active (*95
31994).
2 0 3 Enter the code for programming.
...
Enter the number of the mailbox you would like to se-
2 4
lect.
If you select a language that is not available for
the EVM interface, the setting will default to En-
glish. If English is not available, the setting will
default to the first available language.