Miscellaneous functions
Step by step
qmmf
qmhej
78
Using the HiPath 1100 Manager application
Required:
•
Analog line: The system's serial port and the remote
PC must be connected to a modem with access to
the telephone network.
•
Digital line: The S
nected to an ISDN-type digital line, and the remote
PC must have an ISDN modem installed and con-
nected.
Enter the code to enable remote configuration/upgrade
in the programming extension.
w
Wait for a confirmation tone.
t
Replace the handset.
The system will be available for remote configuration via
the application for a specified time period.
Flash time detection for extensions
Allows the system to detect the Flash time generated
by an extension.
Required: An extension equipped with an analog tele-
phone with DTMF operation.
n
Lift the handset.
Enter the code to enable Flash time detection for exten-
sions.
d
Press the Flash key.
t
Replace the handset.
[1] The system must be activated during a conversation by configuring
certain parameters (see General programming - remote configura-
tion in the Programming manual). For further information on how
to use the HiPath 1100 Manager application refer to the instruc-
tions in the Help file.
[2] This feature does not work when an analog telephone is connected
to an optiPoint 500 through an analog adapter.
optional module must be con-
0
1
2