Using The Hipath 1100 System Manager Application - Siemens HiPath 1100 User Manual

Step by step
MORE FEATURES ?
*992=REMOTE ADMIN ON?
qmmf
w
p
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
w
p
To set the required configuration, proceed as if the re-
mote telephone were locally connected to the system.
If an external programmer does not carry out the
programming within a specified time period, the
remote configuration process times out.
Using the HiPath 1100 System Manager
application
Required:
• Analog line: The system's serial port and the remote
PC must be connected to a modem with access to
the telephone network.
• Digital line: The S
nected to an ISDN-type digital line, and the remote
PC must have an ISDN modem installed and con-
nected.
Press to access the Service menu.
Select and confirm.
or
Enter the code to enable remote configuration/upgrade
in the programming extension.
The system will be available for remote configuration via
the application for a specified time period.
[1] The system must be activated during a conversation by configuring
certain parameters (see General programming - remote configura-
tion in the Programming manual). For further information on how
to use the HiPath 1100 Manager application refer to the instruc-
tions in the Help file.
Miscellaneous functions
1
optional module must be con-
0
101