5
UTILITY PACKAGE (GX Configurator-DA)
5.6.4
Perform operation in the following sequence to save/restore the user range.
(1) Switch to the pass data screen
(2) User range saving
5
- 27
5.6 Monitoring/Test
5.6.4 Pass data
Pass data
Perform the operation in Section 5.6.1 to display the Pass data screen.
(a) Set the user range to be used in the Setting value field of CH
cation setting, and click the Execute test
When the user range setting is completed, the set user range is displayed in the
Current value field of CH
(b) Change the Setting value field of Pass data read request to "Request", and click
the
When read is completed, the values are displayed in the Current value fields of
CH
Industrial shipment settings offset/gain values/CH
set/gain values.
(c) Compare the values with those in the range reference table, and record them if
they are correct.
Refer to Section 7.4 for the range reference table.
Pass data classification setting.
button.
Pass data classifi-
button.
User range settings off-