Mitsubishi MELSEC-Q series User Manual page 39

3
SPECIFICATIONS
(4) If the operation of the programmable controller CPU varies at the setting of D/A con-
version enable, D/A output enable and analog output CLEAR, the rate control func-
tions operate as indicated below.
Analog output value
Programmable controller
CPU status
(5) When the scaling function is used, digital input values converted within the scaling
range are limited.
• If the programmable controller CPU has switched from RUN to STOP (error):
Rate control does not function.
• If the programmable controller CPU has switched from STOP (error) to RUN:
Rate control functions.
Analog value converted
from digital input value
RUN
Rate control valid
Offse value
RUN
STOP(error)
3.2 Function List
3.2.4 Rate control function
1
2
Analog value converted
from digital input value
3
4
5
6
7
8
3
- 17