Mitsubishi MELSEC-Q series User Manual page 175

APPENDIX
Device
(S) + 7 CH2 Industrial shipment settings gain value
(S) + 8 CH3 Industrial shipment settings offset value
(S) + 9 CH3 Industrial shipment settings gain value
(S) + 10 CH4 Industrial shipment settings offset value
(S) + 11 CH4 Industrial shipment settings gain value
(S) + 12 CH5 Industrial shipment settings offset value
(S) + 13 CH5 Industrial shipment settings gain value
(S) + 14 CH6 Industrial shipment settings offset value
(S) + 15 CH6 Industrial shipment settings gain value
(S) + 16 CH1 User range settings offset value
(S) + 17 CH1 User range settings gain value
(S) + 18 CH2 User range settings offset value
(S) + 19 CH2 User range settings gain value
(S) + 20 CH3 User range settings offset value
(S) + 21 CH3 User range settings gain value
(S) + 22 CH4 User range settings offset value
(S) + 23 CH4 User range settings gain value
(S) + 24 CH5 User range settings offset value
(S) + 25 CH5 User range settings gain value
(S) + 26 CH6 User range settings offset value
(S) + 27 CH6 User range settings gain value
(S) + 28
to System area
(S) + 35
Control data (2/2)
Item
*1 Set only the pass data classification setting (S)+2. If data is written to the area set by the system, the
offset/gain values will not be read properly.
*2 The set value of the Pass data classification setting, (S) + 2, varies depending on the module. Atten-
tion must be paid.
*3 An area of 36 words is required for (S).
Appendix 1 Dedicated Instruction List and Available Devices
*1
Set data
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Appendix 1.2 G(P).OGLOAD
Setting
Set by
range
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
- System
App
- 5