Mitsubishi MELSEC-Q series User Manual page 103

5
UTILITY PACKAGE (GX Configurator-DA)
(3) User range restoration
(a) Set the user range to be used in the Setting value field of CH
(b) Set the recorded values in the Setting value fields of CH
(c) Select all the Setting value fields of CH
(d) Change the Setting value field of Pass data write request to "Request", and click
cation setting, and click the
When the user range setting is completed, the set user range is displayed in the
Current value field of CH
tings offset/gain values/user range settings offset/gain values.
values/user range settings offset/gain values, and click the
When write is completed, the set values are displayed in the Current value fields
of CH Industrial shipment settings offset/gain values/CH
offset/gain values.
the button.
Make sure that the indication in the Current value field of Pass data write request
changes from "Request" to "OFF" on completion of write.
button.
Pass data classification setting.
Industrial shipment settings offset/gain
5.6 Monitoring/Test
5.6.4 Pass data
Pass data classifi-
Industrial shipment set-
button.
User range settings
5
- 28
1
2
3
4
5
6
7
8