System Configuration; Applicable Systems - Mitsubishi MELSEC-Q series User Manual

2

SYSTEM CONFIGURATION

2 SYSTEM CONFIGURATION
This chapter explains the system configuration of the Q66DA-G.
2.1

Applicable Systems

This section describes the applicable systems.
(1) Applicable modules and base units, and No. of modules
Applicable CPU module
CPU type
Programmable
controller CPU
C Controller module
(a) When mounted with a CPU module
The table below shows the CPU modules and base units applicable to the
Q66DA-G and quantities for each CPU model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
CPU model
Q00JCPU
Basic model QCPU Q00CPU
Q01CPU
Q02CPU
Q02HCPU
High Performance
Q06HCPU
model QCPU
Q12HCPU
Q25HCPU
Q02PHCPU
Q06PHCPU
Process CPU
Q12PHCPU
Q25PHCPU
Q12PRHCPU
Redundant CPU
Q25PRHCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q13UDHCPU
Universal model
Q26UDHCPU
QCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q13UDEHCPU
Q26UDEHCPU
Safety CPU QS001CPU
Q06CCPU-V
Q06CCPU-V-B
*1 Limited within the range of I/O points for the CPU module.
*2 Can be installed to any I/O slot of a base unit.
No. of mod-
ules *1
Main base unit
Up to 16
Up to 24
Up to 64
Up to 64
Up to 53
Up to 36
Up to 64
N/A
Up to 64
2.1 Applicable Systems
Base unit *2
Extension base
unit
: Applicable, : N/A
2
- 1
1
2
3
4
5
6
7
8