Appendix 1.1 G(P).Offgan - Mitsubishi MELSEC-Q series User Manual

APPENDIX

Appendix 1.1 G(P).OFFGAN

Switches the mode of the Q66DA-G. (Normal mode to offset/gain setting mode, offset/gain
setting mode to normal mode)
Internal device
(System, user)
Set data
Bit
(S) —
[lnstruction [Execution
symbol] condition]
G.OFFGAN
GP.OFFGAN
Device
Un Start I/O number of the module
Mode switching
0: Switching to normal mode
(S) 1: Switching to offset/gain setting mode
The setting of any other value results in "switching to offset/gain setting
mode".
(1) Function
App
- 2 Appendix 1 Dedicated Instruction List and Available Devices
Appendix 1.1 G(P).OFFGAN
Link direct device
File
register
Word Bit
Command
Comannd
Description
Switches the mode of the Q66DA-G.
• Normal mode to offset/gain setting mode (the offset/gain setting mode status flag
(XA) turns ON)
• Offset/gain setting mode to normal mode (the offset/gain setting mode status flag
(XA) turns OFF)
(1) When the offset/gain setting mode is switched to the normal mode, Module
Ready (X0) turns from OFF to ON.
Note that initial setting processing will be executed if there is a sequence pro-
gram that makes initial setting when Module Ready (X0) turns ON.
(2) D/A conversion is discontinued if the mode is switched (from the normal mode
to the offset/gain setting mode or from the offset/gain setting mode to the nor-
mal mode).
To resume D/A conversion, switch to the normal mode and then turn ON
Operating condition setting request (Y9).
Usable devices
Intelli-
gent func-
J \
tion
module
Word
device
U \G
—
Set data
Constant
Index
register
Z K, H S
— —
G.OFFGAN Un
GP.OFFGAN Un
Setting range
0 to FE
H
0 ,1
Other
—
( S)
( S)
Data type
Binary 16 bits
Binary 16 bits