When User Range Setting Is Used And Initial Setting Was Made With Gx Configurator-Da (Other System Is Unavailable) - Mitsubishi MELSEC-Q series User Manual
Gx configurator-da.
channel isolated digital-analog converter module
Hide thumbs
Also See for MELSEC-Q series:
- Programming manual (1296 pages) ,
- User manual (814 pages) ,
- Reference manual (532 pages)
Table of Contents
Advertisement
7
ONLINE MODULE CHANGE
7.3.4
(1) Conversion disable
7
7.3 Online Module Change Procedure
- 19
7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA (other system
When user range setting is used and initial setting was made
with GX Configurator-DA (other system is unavailable)
(a) On the Operating condition setting screen of GX Configurator-DA, set "Disable" in
the Setting value field of CH
the
(b) After making sure that the indication in the Current value field of CH
conversion enable/disable setting is "Disable", change the Setting value field of
Operating condition setting request to "Setting request", and click the
button to stop conversion.
Confirm that conversion has stopped with the actual analog output value.
D/A conversion enable/disable setting, and click
button.
D/A
Advertisement
Table of Contents
