Mitsubishi MELSEC-Q series User Manual page 88

5
UTILITY PACKAGE (GX Configurator-DA)
(2) Command buttons
(3) Menu bar
5
- 13 5.3 Utility Package Operation
5.3.3 Starting the Intelligent function module utility
Common operations to the <<Intelligent function module parameter>> tab and
<<FB support parameter>> tab
Deletes the initial setting and auto refresh setting of the selected
module.
However, if initial setting and auto refresh setting have been pre-
pared and the cell of initial setting or auto refresh setting is
selected and executed, only the setting of the selected cell is
deleted.
Closes this screen.
When the <<FB support parameter>> tab is selected
Moves the setting of the selected line to the <<Intelligent function
module parameter>> tab.
When the <<Intelligent function module parameter>> tab is selected
(a) File menu
Intelligent function module parameters of the project opened by GX Developer are
handled.
[Open parameters]:
[Close parameters]:
[Save parameters]:
[Delete parameters]:
[Open FB support parame-
ters]:
[Save as FB support parame-
ters]:
[Exit]:
(b) Online menu
[Monitor/Test]:
[Read from PLC]:
[Write to PLC]:
Moves the setting of the selected line to the <<FB support
parameter>> tab.
Reads a parameter file.
Closes the parameter file. If any data are
modified, a dialog asking for file saving
will appear.
Saves the parameter file.
Deletes the parameter file.
Opens the FB support parameter file.
Saves the FB support parameter file.
Closes this screen.
Activates the Select monitor/test module
screen.
Reads intelligent function module param-
eters from the CPU module.
Writes intelligent function module param-
eters to the CPU module.