Mitsubishi MELSEC-Q series User Manual page 123

6
PROGRAMMING
(3) Programming example
Write digital values
Set analog output enable
Read warning output flag
Error code display and reset processing
To write the intelligent function module parameters, set the target remote I/O sta-
tion from [Online] - [Transfer setup] on GX Developer.
They can be written by:
• Directly connecting GX Developer to the remote I/O station.
• Connecting GX Developer to another device such as a CPU module and
passing through the network.
6.3.1 Program example using the utility package
Processing for warning output
Processing for warning output
6.3 For Use on Remote I/O Network
CH1 digital value setting
CH2 digital value setting
CH1 output enable
CH2 output enable
Warning output channel check
CH2 warning output (upper
limit value) processing
CH2 warning output (lower
limit value) processing
Warning output clear request
(YE) ON
Warning output clear request
(YE) OFF
Error code output in BCD
Error clear request (YF) ON
Error clear request (YF) OFF
6
- 14
1
2
3
4
5
6
7
8