Fb Conversion Of Initial Setting/Auto Refresh Setting - Mitsubishi MELSEC-Q series User Manual

5
UTILITY PACKAGE (GX Configurator-DA)
5.7

FB Conversion of Initial Setting/Auto Refresh Setting

[Purpose]
[Operating procedure]
[Setting screen]
[Explanation of items]
(1) Items
5
- 29 5.7 FB Conversion of Initial Setting/Auto Refresh Setting
FB is generated automatically from the intelligent function module parameter (initial
setting/auto refresh setting).
Intelligent Function Module Parameter Setting Module Selection Screen
<<FB Support Parameter>>
Start I/O No : The start I/O No. of the information which is set up on the
Module model name : The module model name of the information which is set up
Initial setting : Set up whether to apply FB conversion to the parameter or
Auto refresh : Set up whether to apply FB conversion to the parameter or
FB conversion
currently open intelligent function module parameter is dis-
played.
on the currently open intelligent function module parameter
is displayed.
not.
Check if you apply FB conversion to the parameter.
not.
Check if you apply FB conversion to the parameter.