Attaching A Lens - Sony MEMORY STICK HDC-950 Operation Manual

3-3 Attaching a Lens

The procedure for attaching a lens to the camera is as
follows.
1
Push the lens fixing lever upwards and remove the
lens mount cap from the lens mount.
2
Align the lens' alignment pin with the notch in the
upper part of the lens mount and insert the lens into
the mount.
3
While supporting the lens, push the lens fixing
lever downwards to secure the lens.
3-4(E)
Chapter 3 Preparations
For information on handling lenses, refer to the lens'
operation manual.
5 2 4 1,3
4
Connect the lens cable to the LENS connector.
5
Secure the lens cable with the cable clamp.