How To Select A Pipe Class; How To Select A Pipe Size - Siemens SITRANS F Operating Instructions Manual

Section 2
THE PIPE DATA MENU STRUCTURE (continued)
Pipe Data (cont.)

2.2.1 HOW TO SELECT A PIPE CLASS

The 1010P pipe tables are arranged by classes of common type and material. The default selection is
[Manual Entry]. As its name infers, you would use this selection to manually enter individual pipe pa-
rameters.
To select a Pipe Class:
To access the [Pipe Class] option list press
To scroll through the available classes press
To select the class that fits your application press
When you pick a Pipe Class, the [Select Pipe Size] menu cell (see below) presents the pipe size
option list associated with the selected class. By using the pipe class and pipe size option lists, you
automatically load all the required pipe information. You can also select a pipe class/size, then edit any
of the associated defaults to fine-tune the pipe data.
NOTE: Create custom pipe data via the Pipe Table editor in the Meter Facilities menu.

2.2.2 HOW TO SELECT A PIPE SIZE

Selecting a Pipe Size installs the selected pipe parameters into the balance of the [Pipe Data] menu
cells and prepares the 1010 for Transducer selection and Installation. This option is not applicable if the
Pipe Class is [Manual Entry].
Pipe Material Steel
ABS
Aluminum
Black Iron
Brass
Cast Iron
CuNi (70/30)
CuNi (90/10)
Copper
Ductile Iron
FRP
Glass
Hastelloy
Inconel
Kynar (PVDF)
Monel
Nickel
Polyethylene
PVC (Plastic)
Teflon
Titanium
Wall Thickness x.xxx (numeric entry)
Liner Material None
Cement
Coal Tar
Enamel
Glass
Plastic
HDPE
Teflon
Rubber
Liner Thickness x.xxx (numeric entry)
ENT
2-8
1010PFM-3G