How To Create/Name A Site Setup; How To Enable/Disable Site Security - Siemens SITRANS F Operating Instructions Manual

Section 2

2.1.3 HOW TO CREATE/NAME A SITE SETUP

Use this command to create a new Site Setup. This is the first action required for an original installa-
tion. Create/Name Site inserts system defaults in all the appropriate menu cells. You can edit these
defaults as necessary to suit your needs.
You do not have to provide a site name in order to create a new Site Setup. You can create a site simply
by pressing to access the menu cell entry field and then pressing
This creates a "nameless" Site Setup. However, if you intend to use the meter's multi-site storage
facility, you must enter a unique site name for each site setup you want to retain in the site storage
memory.
To Create and Name a new Site Setup:
To access the first character position press
To select a character press
To select the second character press
Repeat this process to select all the characters (8 max.) you want to use to identify the new Site Setup.
To create the new Site Setup press
NOTE: If you decide to use numbers in the site name, you can type these characters directly
from the keypad.

2.1.4 HOW TO ENABLE/DISABLE SITE SECURITY

With Site Security enabled, the meter will require a password before it allows any activity that could
interrupt or affect system operation. You can still access the Installation Menu. However, Site Security
limits access to the viewing of parameters only. In other words, you will still be able to review site data,
but you will not be able to make any changes.
Activate Site Security with care. Once activated, the only way to deactivate it is via the Site Security
[Off] command. However, the cursor will not move to the Site Security ON/OFF option list until you
enter the correct password. Therefore, it is essential that you never forget or misplace the password.
The only way to deactivate Site Security without knowing the password is to return the unit to Siemens.
However, the process the factory uses to remove site security will eliminate any existing site data as
well.
CAUTION: MAKE CERTAIN THAT YOU RETAIN A COPY OF THE PASSWORD IN A SECURE
LOCATION.
To activate Site Security:
To access Site Security option list press
To scroll the option list to [On] press
display screen.
then to highlight to next character position.
ENT
ENT
then
2-4
.
ENT
. [Enter Code?] appears at the top of the
1010PFM-3G