Siemens SITRANS F Operating Instructions Manual page 64

Section 1
Press and hold .
Note that the character position begins to scroll upward through the alphabet of capital letters. Con-
tinue to scroll until the block cursor shows [S]. Press
Note the character [S] remains at the first character position and that the block cursor moves to the
second character position.
Press and hold . Note that the capitalized alphabet list begins to scroll downward through the
alphabet from [S]. Stop scrolling at letter [I]. Press
position. Scroll back up to letter [T].
Move the cursor to the fourth character position. Scroll down to letter [E]. Move the cursor to the fifth
character position. Type [1] on the numeric keypad to complete the site name.
Siemens 2 Channel [1]
Right Arrow & Enter Creates a new Site
Recall Site Setup
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Save/Rename Site
Channel Setup
Siemens 2 Channel [1]
Right Arrow & Enter Creates a new Site
Recall Site Setup
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Save/Rename Site
Channel Setup
Siemens 2 Channel [1]
Right Arrow & Enter Creates a new Site
Recall Site Setup
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Save/Rename Site
Channel Setup
1-20
Channel 1
No Sites
No
?
Off
No Sites
.
Channel 1
No Sites
No
?S
Off
No Sites
to move the block cursor to the third character
Channel 1
No Sites
No
?SITE1
Off
No Sites
1010PFM-3G
This block cursor is
currently placed at
the first character
position.