Liner Material; Liner Thickness; The Application Data Menu - Siemens SITRANS F Operating Instructions Manual

Section 2
NOTE: Do not use ASA schedule code to specify the wall thickness. You must enter actual
dimensions. We recommend that you use the 1010P Thickness Gauge to obtain an
accurate dimension.
To enter the Pipe Wall Thickness:
To enable numeric entry press
Use the keypad's numeric keys to type exact wall thickness in inches or millimeters.
To register the pipe wall thickness press

2.2.6 LINER MATERIAL

For lined pipes, select a pipe liner from the material option list. If the pipe liner material does not appear
on the list then select the closest type available. If necessary, call Siemens Customer Service for
additional help. The system default Liner Material is [None].
If the pipe does not have a liner, press
The Liner Material option list offers a selection of common liner materials.
To select a Liner Material:
To access the [Liner Material] option list press
To scroll to the required liner material press
To register selection press

2.2.7 LINER THICKNESS

If you specified a pipe liner in the Liner Material menu cell, then use this menu cell to set its exact
thickness in appropriate units (English or Metric).
To enter a Liner Thickness:
To enable numeric entry press
Use the number keys to type the exact liner thickness value.
To register the data press
2.3

THE APPLICATION DATA MENU

This Menu becomes available after picking a Meter Type, Measurement Channel and Measurement
Technology. Use of this menu is optional.
CAUTION: An erroneous Viscosity entry could affect the meter's intrinsic calibration. Do not
alter the default viscosity unless you are sure of your data.
ENT
twice to bypass to the next two menu cells.
ENT
ENT
2-10
1010PFM-3G