How To Use The Installation Menu - Siemens SITRANS F Operating Instructions Manual

Section 1
Menu Prompt Line
Current Selected
Meter Type
Selected Channel
Highlighted Menu Cell
Highlighted Data
Menu Cell
Menu Cell Data
Current Selected Menu The highlighted bar at the bottom of the screen shows the name of the menu that you
1.9

HOW TO USE THE INSTALLATION MENU

This section introduces the System 1010P Installation Menu. It explains how to access and leave the
Installation Menu, and how to enter site data. The Installation Menu consists of submenus, each provid-
ing individual menu locations (menu cells) that store site data. For convenience, this manual refers to
sub-menus simply as menus (e.g., the Pipe Data Menu). Shown below is the Clamp-on, Full Site setup
screen for Channel 1 of a dual-channel meter. Single channel systems are identical. For FastStart
setup, refer to paragraph 1-11.
EXPLANATION OF THE CALL-OUTS
When you select a menu cell, a highlighted text prompt appears on the top of the
screen to explain the function of the cell.
[2 Channel] indicates Dual Channel meter operating mode selected.
The [1] indicates that measurement Channel 1 is currently selected.
Highlighting a menu cell switches its left-hand and right-hand columns to being
highlighted (white type on black).
The right-hand column shows the current value highlighted. Pressing the <Right
Arrow> provides access to an option list or numeric field where you can change the
current value as required.
A menu cell is an individual location within a menu (in this case Pipe Data) that stores
a parameter (either a numeric entry or an option list selection.
The right-hand column shows the current value stored by left-hand column menu cell.
The Pipe Data Menu includes option list items and numeric entries.
accessed (e.g., Pipe Data).
Seimens
Create-Name-Recall-Enable & Delete Site
Channel Setup
Pipe Data
Application Data
Pick/Install Xdcr
Operation Adjust
Flow/Total Units
Data Span/Set/Cal
Stripchart Setup
Datalogger Setup
I/O Data Control
Diagnostic Data
Full Site Setup
2 Channel [1]
1-11
1010PFM-3G