Liquid Data Menu Items; The Site Setup Data Menu; Site Setup Menu Items - Siemens SITRANS F Operating Instructions Manual

Section 2
Reynolds # 1010 corrects the current flow rate in accordance with this Reynolds number. This
number is determined from pipe ID, current flow rate and liquid kinematic viscosity.

2.11.5 THE SITE SETUP DATA MENU

This menu provides data pertaining to transducer characteristics and operation. Some menu items
are for technical support interpretation only.
fx (drive)
N (burst length)
Ltn (in)
Vfmax
Vs max m/s
Vs min m/s
Empty %
Samples/Cycle
Max Damping
Min Damping
HF

LIQUID DATA MENU ITEMS

Siemens
Current transit drive code
fx (drive)
N (burst length)
Ltn in
Vfmax GAL/MIN
Vs max m/s
Vs min m/s
Empty %
Samples/Cycle
Max Damping
Min Damping
HF
Site Setup Data

SITE SETUP MENU ITEMS

Current Transmit drive code selected during Initial Makeup. The drive code con-
trols the sonic transmit signal.
Transmit burst duration selected during Initial Makeup. To change N count press
<Right Arrow>. At equal sign enter numeric value (1 to 9 only).
Spacing distance between the transducers. It will be in inches or millimeters,
depending on default units.
The flow velocity (in selected units) corresponding to one whole cycle offset
between upstream and downstream receive signals.
Maximum correctly calibrated Vs for current transducer spacing.
Minimum correctly calibrated Vs for current transducer spacing.
Value of Empty Alarm Setting. The meter will declare an empty status if signal
strength drops below this value.
Digital sampling rate.
Maximum damping. Use to average digital data when an unstable condition oc-
curs.
Minimum damping. Use to average digital data when an unstable condition oc-
curs.
Flow registration correction parameter.
2 Channel [1] Channel 1
30
5
-1.154
1577.42
2165.41
936.62
30
16
0.120
2-62
1010PFM-3G