Main Diagnostics Screen; Main Diagnostic Menu Description; Flow Data Menu - Siemens SITRANS F Operating Instructions Manual

Section 2

2.11.1 MAIN DIAGNOSTICS SCREEN

This is the main Diagnostics Data screen. It provides menus that show Flow, Application, Liquid and
Site Setup information. In addition, the Test Facilities menu provides test/control functions to optimize
operation, analyze application conditions and to recover system operation. As shown below, diagnos-
tics provides six menus and two menu cells:
Flow Data
Application Info
Liquid Data
Site Setup Data
Test Facilities
Print Site Setup
Date Site Created

2.11.2 FLOW DATA MENU

This menu provides a "live" display of all flow-related output data.
Siemens
Real-time flow-related data
Path Select
Path Enable
Flow Data
Application Info
Liquid Data
Site Setup Data
Test Facilities
Print Site Setup
Date Site Created
Diagnostic Data

MAIN DIAGNOSTIC MENU DESCRIPTION

This menu shows flow rate, total & alarm data; adjustable flow limits.
This menu shows current meter operating status.
This menu shows current Reynolds # and RTD temperature readings (if
this system includes optional RTD Temperature measurement capability).
This menu shows current transducer setup data and signal status.
This menu provides system test and recovery routines.
This Menu cell allows you to send an ASCII dump of the current Site Data to
a RS-232 port device (e.g. a printer or laptop computer).
This menu cell shows date and time when the current site was created.
Siemens
Current Flow Rate and Units
Flow GAL/MIN
Flow Vel F/S
Total KGAL
Vs m/s
Signal mV
Valc %
Vaer %
Alarm Status
AnCal GAL/MIN
HiFlow GAL/MIN
LoFlow GAL/MIN
Flow Data
NOTE: Menu shows English units (i.e., gallons).
Dual Path ABC
All
N/A
No
04.18.01 13.24.01
Dual Path SITE1
-2.26
-0.60
0.0000
1273.21
44
57
0
---R-----
0.0000
1576.8
-1576.8
2-58
1010PFM-3G