Section 1
Multiple Select Option Lists
Certain option lists allow you to make more than one selection. For example, the Datalogger Data
option list allows you to select any or all of the available data items for your reports. As previously
described, you can use
However, if you press
mains within the option list so that you can make other selections. To deselect a previously selected
item, move the cursor next to that item and then press
option list.
Entering Numeric Data
When a menu cell requires a numeric answer, press
(=) appears before the current entry. You can now use the number keys and the decimal point key to
type a new value. If applicable, you can use <+/-> key to change the mathematical sign of the number.
Press
to store the numeric data.
ENT
NOTE: All Numeric Data cells provide a four-function calculator via the keypad's arithmetic
function keys.
Siemens
Access Liquid Option List
Select Liquid
Estimated Vs m/s
Viscosity cS
Density SG
Liquid Class
to move the cursor through the list.
ENT
to select an item,a plus sign (+) appears next to that item. The cursor re-
Siemens
Select Datalogger Data
Datalogger Mode
Datalogger Data
Log Time Interval
Datalogger Events
Display Datalogger
Datalogger Setup
Siemens
Enter pipe Outer Diameter manually
Select Pipe Class
Select Pipe SizeN/A
Pipe OD (in)
Pipe Material
Wall Thickness
Liner Material
Liner Thickness
Pipe Data
2 Channel [1]
Channel 1
20% Ethyl Glycl
1600
2.00
1.030
. You press
CLR
2 Channel [1]
+Site Id
+Date
+Time
Flow
+Average Flow
Raw Flow
Total
Vs
Valc
to access a number entry field; an equal sign
2 Channel [1] Channel 1
Manual Entry
= 0.500
Steel
0.100
None
0.000
1-14
1010PFM-3G
to leave a multiple select
1