How To Delete A Site Setup; How To Save/Rename A Site Setup - Siemens SITRANS F Operating Instructions Manual

Section 2
To select the first character, use the numeric keys or press
To move the cursor to the first character position press
To move the cursor to the second character position press
Repeat the selection process for the second character. Continue this process until all
the required characters (8 max.) appear in the field.
To store code press
Re-type the code exactly as described above.
ENT
Pressing
To scroll option list to [Site Security: On] press
must enter the correct code to turn it off.
To activate Site Security press

2.1.5 HOW TO DELETE A SITE SETUP

If you attempt to save a Site Setup when the memory is full, the screen will show [Memory Full]. If you
receive this message after issuing a Save/Rename Site command, then you will have to delete an
unneeded Site Setup to clear memory space. Note that Datalogger storage and Site Storage share a
common memory pool. Therefore, a large amount of logged data could also trigger the [Memory Full]
message. See [Meter Facilities/Datalogger Control] for instructions on how to clear Datalogger memory.
Using the Defragment Command may also allow additional sites to be stored (see Meter Facility/
Memory Control Menu).
To delete a stored Site Setup:
To highlight [Delete Site] press
To access the [Delete Site] option list press
Move the cursor to the site name of the site setup you want to delete.
To delete the obsolete site setup press

2.1.6 HOW TO SAVE/RENAME A SITE SETUP

The Save/Rename Site command copies data from Active Memory to the Site Storage Memory. Saved
Site Setups can be recalled for future use. This menu cell allows you to save a Site Setup at any time
during the programming process. However, you must recall and complete the Site Setup in order to
achieve operation. When you access the Save/Rename Site menu cell, the name of the most recently
created Site Setup (see Create/Name Site) appears automatically. If this name is acceptable, you can
press to save the Site Setup.
ENT
ENT
. [Confirm Code ?] appears at the top of the display screen.
moves the cursor to the Site Security option list.
ENT
. Once you turn on Site Security, you
ENT
2-5
1010PFM-3G
.