Transducer Type Menu Structure - Siemens SITRANS F Operating Instructions Manual

Section 4
The Transducer Type menu allows you to place "marks" next to any transducers that you may want the
meter to consider preferentially during its recommendation routine. These will be included on the rec-
ommended list, which appear highlighted at the top of the display screen. Left-most transducer on list
is most applicable; right-most, least applicable.
Transducer Type
To mark Transducers:
Access the Transducer Type menu by pressing
Scroll the highlight by pressing
press to access the size option list.
Scroll the option list by pressing
Note that a plus sign (+) appears before each "marked" transducer.
If you want to clear a "marked" transducer, move the highlight to the transducer then press the
key. Note that this removes the plus sign.
CLR
To leave an option list press

TRANSDUCER TYPE MENU STRUCTURE

1011 Universal
1011H High Precision
991 Universal
A1
A2
B1
B2
B3
C1
C2
C3
D1
D2
D3
E1
E2
E3
A1H
A2H
A3H
B1H
B2H
C1H
C2H
D1H
D2H
D3H
D4H
0A
0
1
2
2A
3
3A
4
4A
5
5A
to a transducer type (e.g., 1011H Hi Precision) then
ENT
then press to "mark" desired transducers.
4-5
1010PFM-3G