Selecting Items From An Option List - Siemens SITRANS F Operating Instructions Manual

Section 1

Selecting Items from an Option List

This example shows how to use an option list to select a liquid for your application. Do not worry about
how to access this menu right now. That will be explained later. Examine the screen below. Note that
the menu name [Application Data] appears highlighted on lower left of the screen. Note also that the
menu cell [Liquid Class] is highlighted and what is shown in the right-hand column is the current
answer: [Water 20C/68F].
Pressing changes the left-hand column to [Select Liquid]. Pressing
tion list. This expands the highlighted area to show the list contents. Note that a cursor (arrow) points
to the top item on the list.
Pressing keys scroll the option lists in their respective directions. Every key press moves the
cursor to the next item in sequence. Due to the size of the display screen, some option lists include
more items than can be shown on the display. For example, on the screen above the last option shown
is [Acetic Acid]. However, with this option list, you can continue to press
ections.
When you arrive at the last item on a list, pressing
option lists are"wrap-arounds."
To select an option list item, move the cursor to the item and then press
your selection at the top of the list and moves you out of the option list to the next menu cell. Examine
the screen on next page. The option list item:[Water 20C/68F] has been selected. Note that this ap-
pears on the right-hand column and that the highlighted area moves to the next menu cell in sequence:
[Estimated Vs m/s].
Siemens 2 Channel [1]
Select Liquid Class from Liquid Table
Liquid Class
Temperature Range
Pipe Configuration
Anomaly Diams
Application Data
Siemens 2 Channel [1]
Access Liquid Option List
Select Liquid
Estimated Vs m/s
Viscosity cS
Density SG ens
Liquid Class
1-13
Channel 1
Water 20C/68F
-40F to 250F
Fully Developed
10
Channel 1
>Water 20C/68F
Water 50C/122F
Water 75C/167F
Water 100C/212F
Water 125C/257F
Water 150C/302F
Water 175C/347F
Water 200C/392F
Water 225C/437F
Water 250C/482F
Acetic Acid
again brings you back to the top of the list. The
1010PFM-3G
again accesses the op-
to see more liquid sel-
ENT
. This places