Pipe Configuration Menu Structure; Pipe Configuration Option List Definitions - Siemens SITRANS FUG1010 IP65 NEMA 4X Instruction Manual

Section 4
To highlight the desired piping configuration press
To register selection press
The default pipe configuration (Fully Developed) wll cause the flowmeter to use the conventional Reynolds
Compensation Table when compensating for liquid flow profile behavior.
Use this menu cell to enter the
number of pipe diameters
between the upstream
configuration and the
transducer installation.

Pipe Configuration Menu Structure

Pipe Data
* Default

PIPE CONFIGURATION OPTION LIST DEFINITIONS

Fully Developed
1 Elbow
Dbl Elbow +
Dble Elbow -
Valve
Expander
Reducer
Norm Entry
Header Inlet
Intrusions
ENT
Siemens
Disignate Pipe Shape Near Transducers
Select Path
Select Pipe Class
Select Pipe Size
Pipe OD <in>
Pipe Material
Wall Thickness
Pipe ID
CC129 Thickness
Pipe Configuration
Anomaly Diams.
ThermExp Coef 1/F
Mod of Elast PSI
Pipe Data
Ö
Pipe Configuration
(Change to Upstream
Piping)
Ú
Ö
Anomaly Diams
Fully Developed flow, as would be expected for very long straight pipe runs or
installation downstream of a flow condition.
Single 90 degree Elbow upstream of transducer installation.
Double out-of-plane Elbows upstream of transducer installation.
Double in-plane Elbows upstream of transducer installation.
To Be Determined.
Pipe expansion upstream of transducer installation.
Pipe reduction upstream of transducer installation.
To Be Determined.
Header or pipe manifold upstream of transducer installation.
To Be Determined.
Dual Path [1]
1
Manual Entry
No Pipes
6.625
Steel
0.250
Fully Developed
1 Elbow
Dbl Elbow +
Dbl elbow -
Valve
Ö Ú
Fully Developed*
1 Elbow
Dbl Elbow +
Dbl Elbow -
Valve
Ú
Expander
Reducer
Norm Entry
Header Inlet
Intrusions
xxxx (numeric entry)
4-8
1010GCNFM-3C
Path 1
Use this menu cell to select
the pipe configuration that
most accurately represents
the upstream pipe condition.