Hood
Adjustment
NOTE: Before adjusting the hood, loosen each bolt slightly.
1. Adjust the hood hinges right and lefr, as well as fore and aft, by using the elongated holes.
2. Turn the hood edge cushions, as necessary, to make the hood fit flush with the body at front and side edges.
3.
Adjust the hood latch to obtain the proper height at the forward edge.
4. After adiustment, tighten each bolt securely.
9.8 N.m {1.0 kgf,m,
1.2lbl.ttl
NOTE: Move the hood latch
is centered in the hood latch
\ \ " '
)
,/
_ _ _ , /
right or left until the striker
as shown.
6 x 1 . 0 m m
CUSHION
6 x 1 , 0 m m
9.8 N.m 11.0 kgf.m,
7.2 tblfrl
HOOD
2 0 - 9 6