Honda Civic 1998 Service Manual page 1249

Headlights/Front Turn
Signal/Parking Lights
I
Daytime Running Lights Resistor
Test (Canada)
CAUTION: The davtime running lights resistor becomes
very hot when the daytime running lights are on; do not
touch it or the attaching hardware immediately aftel
the lights have been turned oft.
1.
Disconnect the 3P connector from the resistor'
Terminal side of male
terminals
Measure the resistance between the resistor termi_
nals (No.
'l
and No. 2) and the power terminal No 3
Resistance: 1,6 o i 0 08 o
Replace the resistor with a new one it any of the
resistances are beyond specilication.
DAYTIME RUNNING
. ^
23-15'
Replacement
CAUTION: Halogen headlights become very hot in uss;
do not touch them 01 the attaching hardware immedi-
atelv after they have been turned oft.
1.
Remove the lront bumper (see section 20).
2.
Remove the mounting bolts
3.
Disconnect each connector, then remove the head
light/front turn signal/parking light assembly.
MOUNTING
BOLT
HEADLIGHT,/FRONT
TURN SIGNAL/
PARKING LIGHT ASSEMBLY
HEADLIGHT: 60/55 W
FRONT TURN SIGNAL/PARKING LIGHT: 2115 W