Honda Civic 1998 Service Manual page 904

Outer Handle Replacement
NOTE: Raise the glass fully.
1. Remove:
a Door panel
. Plastic cover {see page 20-21
2.
Pull out the retainer clip.
CYLINDER PROTECTOR
LOCK CYLINDER
RETAINER
CLIP
Remove the bolts, then remove the cylinder protec-
tor, lock cylinder and outer handle.
>: Bolt locations,2
I
r$\'*
6 x 1.0 mm
i
\Af@
g.a N.m tr.o tsr.m,
I
?.2 tbI.ft) )
-_-_--/
CYLINDER
LOCK CYLINDER
CYLINOER ROD
20-5
4.
Pull out the outer handle. Pry the outer handle rod
out of its joint using diagonal cutters.
NOTE:
. To ease reassembly, note location @ ofthe outer
handle rod on the joint before disconnecting it.
. Take care not to bend the outer handle rod.
.
Use a shop towel to protect the opening in the
door.
OUTER HANDLE
ROD
DIAGONAL
CUTTERS
5 ,
SHOP
TOWEL
lnstallation is the reverse of the removal procedure,
NOTEj Make sure the door locks and opens properly.
BUSHING
Replace.
\
,1rl'.
€l