Honda Civic 1998 Service Manual page 642

Electrical Troubleshooting
Troubfeshooting Flowchart- AIT Gear position Switch (Open)
\
Possible Cause
. Oisconnected A/T geer position
switch connector
. Open in A/T gear position switch
. Faulty A/T gear position switch
Measure ATP R Voltage:
1. Turn the ignition switch ON (ll).
2. Shift to E position.
3. Measure the voltage between
t h e A 1 1 a n d A 1 3 o r 4 2 6 t e r m i
nals,
WIRE SIDE OF FEMALE TERMINALS
Ii
14-204
. OBD ll Scan Tool indicates Code
P1706.
. Self-diagnosis E indicator tight
blinks six times.
Repair open in the wire botween
l h e A 1 1 t e r m i n a l a n d t h e A / T
gear position switch.
Measure ATP NP Voltage:
1. Shift to E or E position.
2. Measure the voltage between
t h e A 1 0 a n d A 1 3 o r 4 2 6 t e r m i -
nals.
Bepair op6n in the wire between
t h e A 1 0 t e r m i n e l a n d t h e A / T
gea. position switch.
Measure ATP D Voltage:
1. Shift to E position.
2. Measure the voltage between
the Ag and Al3 or 426 termi
nals.
Repair open in tho wire between
the Ag torminal and the A/T gea.
Dosition switch,
To page 14 205