Honda Civic 1998 Service Manual page 1370

\
From page 24'40
Check for an oDen in the SRS main ha.ness:
1. Turn the ignition switch OFF.
2, Disconnect the SRS main harness 2P connector from the
undeFdash fuse/relay box.
3. Check resistance between the No. 1 terminal of the SRS
main harness 2P connector and No. 7 terminal of the
SRS main harness 18P connector.
There should be 0 0.5 o.
Poor contact at the SRS main harness 2P connector;
check the connector.
. lf the connector is OK, substitute a known-good under'
dash fu3e/relay box, and recheck.
. It lhe problem is still present, replace the SnS main
harness.
Open in the SRS main harness; replace the SRS main har'
ness,
SRS MAIN HARNESS
18P CONNECTOR
FUSE/RELAY BOX
caoT
SRS MAIN HARNESS
2P CONNECTOR
24-41