Honda Civic 1998 Service Manual page 1295

\
! - t \
I ' I \
l-l
v
v
Csvrty
Wire Ta3t condition
To3t Desirod result
Possible cause if result is not obttined
A5
BLK
Under all conditions
Check for continuity to ground:
There should be continuity.
. Poor ground (G551)
. An open in the wire
A8
A 1
BLU/BLK
lgnition switch ON (ll)
Check for voltage to ground:
There should be battery voltage.
Blown No. 10 or 11 (20 A) fuse in
the under-dash fuse/relaY box
Faulty power window relaY
An open in the wire
A6 GRN/BLK
A4
RE D/BLU
connect the BLU/BLK
terminal to the RED/YEL
terminal. and the RED/
BLU terminalto the
BLK terminal, then turn
the ignition switch ON
fl r).
Check the driver's window motor:
It should run (the window moves
down).
. Faulty driver's window motor
. An open in the wire
A3 RED/YEL
A7
BLUI/EL
Connect the GRN/BLK
terminal ro the BLUI/EL
terminal, and the BLU/
ORN terminal to the
BLK terminal, then turn
the ignition switch ON
fl r).
Check the passenger's window
motor: lt should run (the window
moves downl.
Faulty passenger's window motor
Faulty passenger's window switch
An open in the wire
BLU/ORN
A't2
BLU
Connect the BLU/BLK
terminal to the RED//EL
terminal, and the BLK
terminalto the RED/
BLU terminal, then
turn the ignition switch
oN 0r).
Check for voltage between the
BLU and BLK terminals: APProx. 6
V should be indicated as the driv-
er's window motor runs.
Faulty pulser
Faulty driver's window motor
An open in the wire
A8
BLK
23-197
\y