Power Windows
Master Switch Input Test (Sedan)
NOTE: The control un it is bu ilt into the power window master switch, and on ly controls driver's door window opera!ons.
l
Remove the driver's armrest, and disconnect the 16P and 1p connectors from the master switch.
2.
Inspect the connector and socket terminals to be sure they are all making good contact.
.
lf the terminals are bent, loose orcorroded, repair them as necessary, and recheck the system.
.
lf the terminals look OK, make the following input tests at the connecror.
-
lf a test indicates a problem, find and correct the cause, then recheck the system.
-
lf all the input tests prove OK, the power window maser switch must be faulty; replace it.
POWER WTNOOW
swtTcH
ABMREST
\
Wire side ot
female terminals
L.
23-198