Rear Brake - Honda Metropolitan CHF50 Service Manual

REAR WHEEL/BRAKE/SUSPENSION
REAR BRAKE
Remove the rear wheel (page 14-4).
INSPECTION
Measure the rear brake drum I.D.
SERVICE LIMIT: 95.5 mm (3.76 in)
Measure the brake lining thickness.
SERVICE LIMIT: 1.0 mm (0.04 in)
DISASSEMBLY
NOTE:
• Always replace the brake shoes as a set.
• Mark all parts during disassembly so they can be
placed back in the original locations.
Loosen the rear brake adjusting nut.
Pull the brake shoes away from the anchor, then
remove the shoes and springs.
SPRINGS
BRAKE SHOES
14-5