Body Cover - Honda Metropolitan CHF50 Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
BODY COVER
REMOVAL
Be careful not to
damage the tabs on
the body cover.
Remove the luggage box (page 2-6).
Open the fuel tank lid.
Remove the bolt and rear grip.
Disconnect the brake/tail/license light 3P connector
and turn signal connectors.
Disconnect the main harness and seat lock cable
from the clamp.
Remove the four trim clips.
Remove the screws and body cover.
INSTALLATION
At installation, be Installation is in the reverse order the removal.
careful not to R
o u t e t n e w
j
r e
harness and cables correctly (page 1-
damage the wire *,•>
harness.
REAR GRIP
CONNECTORS
CLAMP
SCREW
BOLT
FUEL TANK LID
SCREW
TRIM CLIP
DISSEMBLY/ASSEMBLY
Remove the screws, clamp and release the tabs on
the front/side body cover.
TAB
\ ^
\
FRONT
TAB
N
SCREW
BODY COVER
CLAMP
V_i
SIDE BODY COVER
CLAMP
\
SCREW
/
2-7