Honda Metropolitan CHF50 Service Manual page 215

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
SERVICE INFORMATION
GENERAL
ACAUTION
Frequent inhalation of brake shoe dust, regardless of material composition could be hazardous to your health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
• This section covers the front wheel, fork, handlebar, brake and steering.
• A jack or other support is required to support the vehicle.
• Use genuine Honda replacement bolts and nuts for all suspension pivots and mounting points.
SPECIFICATIONS
Unit: mm (in)
ITEM
Minimum tire tread depth
Cold tire pressure
Axle runout
Wheel rim
runout
Brake
Radial
Axial
Right brake lever free play
Brake drum I.D.
Brake lining thickness
Fork spring free length
STANDARD
-
125 kPa (1.25 kgf/cm
2
, 18 psi)
-
-
-
10-20(3/8-13/16)
95.0 (3.74)
3.5 (0.14)
128.5(5.06)
SERVICE LIMIT
0.8 (0.03)
-
0.20 (0.008)
2.0 (0.08)
2.0 (0.08)
-
95.5 (3.76)
1.0 (0.04)
125.9(4.96)
TORQUE VALUES
Front axle nut
Front brake arm nut
Handlebar post nut
Steering stem top cone race
Steering stem lock nut
Equalizer cover bolt
44 N-m (4.5 kgf-m, 33 Ibf-ft)
5.8 N-m (0.6 kgfm, 4.3 Ibfft)
42 N-m(4.3 kgf-m, 31 Ibf-ft)
11 N-m (1.1 kgf-m, 8 Ibf-ft)
69 N-m (7.0 kgf-m, 51 Ibf-ft)
12 N-m (1.2 kgf-m, 9 Ibf-ft)
U-nut
U-nut
Apply a locking agent to the threads
13-3