FINAL REDUCTION
Install the driveshaft into the belt case cover.
Position the assembly collar against the driveshaft
bearing inner race.
Thread the assembly shaft onto the driveshaft.
Hold the assembly shaft and draw the driveshaft
into the bearing inner race by turning the nut.
TOOLS:
Assembly shaft
07965-GM00300
Assembly collar
07965-GM00100
ASSEMBLY SHAFT
Apply oil to a new driveshaft oil seal lip and outer
surface.
Install the driveshaft oil seal.
Apply molybdenum oil solution to the countershaft
sliding surface.
Install the side washer, counter gear and final gear
shaft into the transmission case.
10-10