Table of Contents
Advertisement
KICKSTARTER/DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
ASSEMBLY
Clean any oil and grease from the pulley faces and
weight rollers.
Install the weight rollers on the movable drive face.
Install the ramp plate.
INSTALLATION
Clean any oil and grease from the pulley faces and
the drive belt.
Install the drive face boss into the movable drive
face assembly.
Install the movable drive face assembly onto the
crankshaft while holding the ramp plate.
Install the drive belt onto the drive face boss.
WEIGHT ROLLER
# > *
RAMP PLATE
MOVABLE DRIVE FACE
Install the drive pulley face, ratchet plate and
_
washer.
DRIVE PULLEY FACE 1 WASHER/NUT
Apply oil to the drive pulley face nut threads and
seating surface and install the nut.
Hold the drive pulley face with the special tool and
tighten the nut to the specified torque.
| RATCHET PLATE
TOOL:
Universal holder
07725-0030000
TORQUE: 32 N-m (3.3 kgf-m, 24 Ibf-ft)
Install the belt case cover (page 9-5).
9-11
Advertisement
Table of Contents
Troubleshooting
