Radiator Reserve Tank - Honda Metropolitan CHF50 Service Manual

COOLING SYSTEM
Connect the water hose onto the radiator.
Install the radiator onto the crankcase, aligning the
water pipe and pipe joint of the radiator.
Install and tighten the bolts securely.
Connect the siphon hose and water hose.
Install the right side cover (page 2-8).
Fill the system with the recommended coolant and
bleed any air (page 6-7).
WATER PIPE
SIPHON HOSE
RADIATOR RESERVE TANK
REMOVAL
Remove the body cover (page 2-7).
Remove the ECM (page 15-11).
Disconnect the siphon hose from the radiator
reserve tank.
Remove the screw and radiator reserve tank from
the rear fender.
ECM
INSTALLATION
Installation is in the reverse order of removal.
When installing the radiator reserve tank, align the
boss on the tank with the groove in the rear fender.
Place the scooter on its centerstand and add the rec-
ommended coolant to the upper level line.
6-15